AGIE WIRE EDM PART
阿奇慢走丝配件
　

图片Image	描述Description
	262.213 Wire guide
	326.834.9（A305） Wire guide diamond upper & lower set
	323.304.6（A315） Wire guide lower complete with 326.834.9
	323.314.5（A316） Wire guide upper complete with 326.834.9
	337.884.1
	337.874.2
	164.732.0 Lower wire guide cover
	170.973.2
	167.733
	291.264
	199.484.7（A001） Current supply 9×9×3mmT, Upper & Lower
	326.824.0（A015G） Current supply long life type， coated with Titanium
	358.684.9（A015） Current supply lower
	418.774.6 Roller
	443.474.2（A016） Tungsten Carbide Evolution Excellence & Classic 2.3
	443.464.3（A016C） Copper Tungsten Evolution Excellence & Classic 2.3
	424.914.0 Current supply upper，M6 screw，12×12×29mmL
	424.914.0-1 Current supply upper，coated with Titanium，M6 screw，12×12×29mmL
	424.934.8 Current supply lower，M4 screw，12×12×30mmL
	424.934.8-1 Current supply lower，coated with Titanium，M4 screw，12×12×30mmL
	441.904.0 Plate
	443.834.7 Strip
	326.764.8（A200） Lower water nozzle， for AC series
	337.944.3（A301） Upper speed set nozzle
	326.624（A302） Upper inner nozzle
	185.303.5（A303） Upper standard nozzle
	323.254.3
	352.924.5
	419.054.2 Inside nozzle complete
	419.064.1
	419.234.0 Threading nozzle with o-ring
	419.514.5
	419.524.4 Nozzle for starting hole, 0.7mm
	180.683.5
	338.184.5（A304） Suction tube lower
	251.563.3 Suction tube special for taper cutting OD=30mm×16mmT
	326.844.8
	326.294.6
	326.864.6
	326.604.6（A309） Brake ring set OD=73×ID=60×2mmT
	326.614.5（A310） Wire cutter blade rectangular 5.0×10.0×22.0mm
	326.744.0（A311） Upper round cutter/fixed blade
	338.454.2（A312） Pressure roller complete for brake D=20×10mmT
	180.683.5（A313) Elastic water nozzle
	338.864.2(A314) Threaded ring speed set
	400.754.8
	426.364.6
	323.474.7(A317) Brush for brake
	396.414.5
	419.594.7 Suction tube for HSS series
	251.563.3
	185.343.1(A318) Center ring D = 16.0/10.0/8.0mm
	249.854.1
	291.264.0
	290.754.1 Sapphire Ring D= 19/9/6mm
	288.474
	326.734.1
	441.864.6 Sapphire Ring
	387.834.5
	155.562.2 Diaphragm
	155.562.9
	155.622.4
	155.772.7
	178.222.6 Diaphragm
	408.014.9
	190.062
	190.082.8
	191.593.3 Special blade
	266.414.2
	323.324.4 Tension roller D=25.0mm
	323.334.3 Tension roller D=30.0mm
	323.344.2 Tension roller D=35.0mm
	203.153.2 Ground connections L=690mm
	180.513.4
	184.473 Roller set lower arm 25/30/35mm

版权所有： 深圳市金冶贸易有限公司     Copyright © 2007 Jinye Trading Co.,Ltd.All rights reserved.    
地址：中国广东省深圳市南山区南山大道好来居大厦913室      邮政编码(P.C.)：518054
Add：Room913,9/F.,Haolaiju Building,Nanshan Avenue,Nanshan District,Shenzhen,Guangdong 518054,China.
电话(Tel)：+86-755-26446816       传真(Fax)：+86-755-26446617       邮箱(E-mail)：info@jinyeedm.com