JAPAX / WASHINO  WIRE EDM PART
积柏时/华盛奴慢走丝配件
　

图片Image	描述Description
	J101 SSZ1106-1108 Dies guide upper S type D=0.205/0.255/0.305mm LS-S,LS-X,LUX,LV,LXE,LXR,LDM,ELVY-Manual/AWF
	J102 SSZ2106-2108 Dies guide lower S type D=0.205/0.255/0.305mm LS-S,LS-X,LUX,LV,LXE,LXR,LDM,ELVY-Manual/AWF
	J103 SSZ1006-1008 Dies guide upper A type D=0.205/0.255/0.305mm LS-S,LS-X,LUX,LV,LXE,LXR,LDM,ELVY-Manual/AWF LS-A(LS-250A,350A,500A,800A)
	J104A SSZ3006-3008 Guide diamond lower D=0.205/0.255/0.305mm L=44mm LS-A(LS250A,350A,500A,800A), Manual-float type
	J104B SSZ2006-2008 Guide lower A type D=0.205/0.255/0.305mm L=28mm LS-A(LS250A,350A,500A,800A), Manual
	J108 Dies guide U & L D=0.205mm/0.255mm/0.305mm AMADA (亚米打)/ JAPAX
	W101 Wire guide upper WASHINO TW453
	W102 Wire guide lower WASHINO TW453
	A003 Power feed contact WASHINO TW series
	J001 MGK0001 Current supply upper & lower OD10xID4x7mmT LS-A series(250A.350A.500A.800A.1000A). L300. 500.LXR(AF3)
	J002 MGS1122 Current supply upper & lower 10.5x10.5x7mmT LS-A(Float type).LS-S.LS-X.EXP20. LU3B. LUX3B. LV3.LXE.LXR.LDM.ELVY.(如 LXE350, 500, 800,1000.LXR50,80,100,350S,500S,800S,1000S,350X,500X,800X,1000X.LDM-S,35,50,100)
	J003 AF4G003 Current supply upper & lower 20x20x7mmT LDM-35,50,100. AF-4, LXR-S, EXP, LUX, LXR, LV, LXE
	J004 MGK0101 Power feed contact, upper with groove OD12xID6x6mmT LS-A.LS-S.LS-X.LU3B.LUX-3.LV-3.LXE.LXR.LDM.ELVY.(如LDM-S,35,50,100. LXE350,500,800,1000.LXR50,80,100.LV-3)
	J005 Power feed contact, upper & lower L-300/450
	J201 MGS1131-01 Nozzle lower D=6mm LS-S.LS-X.LU.LD series
	J202 MGS1121 Nozzle lower D=6mm LS-S.LS-X.LU.LD series
	J203 Nozzle lower D=6mm
	J205 MGX5003 Nozzle lower D=3.0/4.0/5.0/7.5mm LUX-3(New).LV-3.LXE(New).LXR Manual/AF type
	J206 MGX5013 Nozzle upper D=3.0/4.0/6.0/9.0mm LUX-3(New).LV-3.LXE(New).LXR Manual/AF type
	J207 MGX5006-1 Nozzle upper, D=6mm LXE-Old type(Manual), LS. LD. LU. LV
	J208 Nozzle lower, special long type, D=4mm LS-A.LS.LD.LU.LV
	J209 Nozzle lower, D=8mm LS. LD. LU. LV
	J210 Nozzle upper, long type, D=8mm
	J211 A4G0001 Nozzle lower, D=4mm LDM / AF-4
	J212 A4G0002 Nozzle lower, D=6mm, L = 13.5 x 32mm LDM / AF-4
	J2421 LDM2010 Nozzle upper LDM
	J213 LDM2306 Nozzle lower, D=4.0/6.0mm LUX. LDM
	J214 水嘴调节盖 Adjustment nut for lower nozzle LDM
	J301-1 聚氨酯钢轮 Urethane(rubber) Steel Rollers 30RL-B-102 SIZE:100mm(OD)x24mm(ID)x20mm(T) 30RL-B-103 (bearing not included) -steel-
	J302 Flange  Lower 80AR-LDM-100

版权所有： 深圳市金冶贸易有限公司     Copyright © 2007 Jinye Trading Co.,Ltd.All rights reserved.    
地址：中国广东省深圳市南山区南山大道好来居大厦913室      邮政编码(P.C.)：518054
Add：Room913,9/F.,Haolaiju Building,Nanshan Avenue,Nanshan District,Shenzhen,Guangdong 518054,China.
电话(Tel)：+86-755-26446816       传真(Fax)：+86-755-26446617       邮箱(E-mail)：info@jinyeedm.com